PAKVF3.5D

This lamination of film foil and polyethylene has a wide range of uses where a high barrier film is needed with a low WVTR. It is ideal for packaging of hygroscopic items and products susceptible to corrosion, and in food or medical device packaging, where very low oxygen levels are required.

NOTE: PAKVF3.5D is 3.5 mils thick and offers the appropriate barrier for food products. In some unique applications where an even stronger barrier is needed, we offer 5 mil thick PAKVF4C structure is 5.0 mils minimum also with an FDA approved sealant layer.

PHYSICAL PROPERTIES (48GaPET/ PE / .00035 FOIL / LDPE)

WATERVAPOR TRANSMISSION RATE (FED. 101)	0.0003 gr./100in2 24 hrs.
O2 TRANSMISSION RATE (MOCON)	0.001/cc/m2 /24 hrs.
BURSTING STRENGTH (TAPPI T403)	>70 psi
PUNCTURE STRENGTH (FED. 101)	>16 psi.
TOTAL THICKNESS	3.5 mil
RECOMMENDED HEAT SEAL CONDITIONS	400°F/40 PSI/1 sec

IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.