This tabletop vacuum sealer is made from high-grade 304 stainless steel and an aniodized aluminum frame. It's perfect for medium to high production use and comes with dual 0.25" heating elements, Unitronics color touch screen, single-ported exhaust, Venturi vacuum pump, and dual retractable nozzles as standard features.
Note: This unit requires a separate compressed air source capable of providing 80 PSI of clean, dry air.
Dual Retractable Nozzles with High-Vacuum Flow Rate
Upper and Lower 0.25" Heating Elements
Unitronics V350 Color Touch Screen with 30 recipe memory
Up to 9-stage gas flush
Venturi Vacuum Pump
Pneumatic Safety-System: Prevents accidental operator injury by use of a back-pressure sensitive micro switch to prevent jaws from locking down in the event an unwanted object (i.e hand or finger) is present in the seal area.
High-Grade Stainless Steel Body, Heavy Duty Anodized Aluminum Frame
Illuminated on/off switch
Emergency stop button on machine face
Handles for portability
Model Number: GXVS-26TS
Max. Seal Length: 26"
Standard Seal Width: 0.25"
Electrical: 115 VAC
Vacuum Pressure: 25" Hg
Air Consumption: 7.8 cfm
|Clean Room Compatible||Yes|
|Air-Flow Rate||5 cfm/min|
|Controller||Digital - Unitronics|
|Optional Dual Element||Standard|
|Power||110V-120V/60Hz (220V available)|
|Manual Vacuum Mode||Yes|
Stainless Steel Feeder Tray
The stainless steel feeder tray is a small shelf which is placed against the front of the unit and allows the bag to be at the jaw height for easier sealing of small to medium sized parts.
Clean Room Ready
Machine taken into Class 100 clean room where all surfaces are wiped down with an 80/20 mix of sterile water/isopropyl alcohol then double bagged and sealed in virgin poly bags.
This option allows the user to operate the unit in a facility where 220V is needed or present.
0.375" Seal Width Upgrade
This upgrade changes out the standard 0.25" elements up to a full 0.375" each for a wider and more visual seal.
Extra Set of Nozzles
We will add an additional set of retractable nozzles which will allow you to vacuum seal 4 small bags or two medium to large sized bags at the same time.
iS2 System Upgrade
The iS2 (Intelligent Sealing System) is a control system for heat sealing equipment that offers pin-point digital control over time, temperature, and pressure, via touch screen interface.
The system is more than a digital control upgrade, it combines an advanced Siemens PLC and HMI with proprietary pneumatic and electrical components, to deliver temperature control within one degree, accurate sealing time with readings every millisecond. Additional conveniences such as recipe storage, operator locks, and graphs of time/temperature put iS2 enabled sealers in a class of their own. Validation ports allow the user to confirm all parameters from a 3rd party calibration/certification service and data is available to be sent to a dedicated terminal to track and record all seals made by the unit.
Stainless Steel Stand
All Stainless Steel means easy to clean, durable and able to perform year after year in almost any packaging environment.
User can adjust stand height from 38”, 43”, and 48” to accommodate user’s needs.
Stainless Steel Shelf with Product Stop
The stainless steel shelf and product stop mounts to the GST-801 and allows the operator to place the bag on top with product stop to prevent it from sliding down and hold the bag taut while the seal jaws come together.
Two Pre-filters with PM indicators which remove contaminants and water from the compressed air line before they reach the nitrogen generator. After leaving the generator the air is pushed through a Post filter which results in a Sterile Nitrogen flow of 99.9999+% efficiency at 0.01 micron. This is essential for food and sensitive applications where purity is critical.
Nitrogen Generator Kit
The Nitrogen Gas Generator (NGG) produces Nitrogen gas (N2) from compressed air. *This module is designed to generate Nitrogen at purities between 95% and 99.5%.
Our (NGG) can be used as a replacement for heavy and bulky Nitrogen gas tanks. Its slick and compact design allows users to integrate this with their current gas flush enabled vacuum sealers without having to worry about it taking up too much space. Also, users will not have to worry about a depleting Nitrogen gas source, as our NGG produces Nitrogen from a clean compressed air source.
See an example of an upgraded 61" GXVS unit below. The touch pad interface and new controls offer pinpoint accuracy with readings every millisecond. Speak with our specialists about what a custom machine could do for your production goals.
Part Number: GK-GVS26
Spare Parts Kit for 26" Workhorse
GXVS-21TS : 21" Dual Retractable Nozzle Vacuum Sealer
GXVS-26TS : 26" Dual Retractable Nozzle Vacuum Sealer
GXVS-31TS : 31" Dual Retractable Nozzle Vacuum Sealer
GXVS-36TS : 36" Dual Retractable Nozzle Vacuum Sealer
GXVS-51TS : 51" Dual Retractable Nozzle Vacuum Sealer
GXVS-61TS : 61" Dual Retractable Nozzle Vacuum Sealer