PAKDRY1500 features an incredible 38-pound puncture resistance, which not only provides superior drop test performance, but also is the best choice for the vacuum packaging of trays, reels, and tubes with sharp edges in the semiconductor/electronics industry. Suitable for ANY vacuum sealing system.
Because PAKDRY1500 utilizes the most current metalizing technology, its moisture barrier performance exceeds foil laminates for low Moisture Vapor Transmission Rate (MVTR), particularly after flexing. The multiple layer construction of PAKDRY1500 provides full protection against ESD, EMI/RFI and tribocharging.
The multiple laminated layers also result in a better light barrier performance than many black interior polymer structures.
NOTE - The anti-static coating applied to PAKDRY1500 means that it is NOT a food grade product. For a food grade (FDA) 7.0 mil high-barrier structure, see PAKSAFE. |
|
Successfully used by NASA in a project involving exposure to a 4.5 MEV electron beam or 300 mega-rad; 6x the 50 Mrad common in Cobalt-60 gamma radiation.
|
Structure: 48 gauge metallized pet/adhesive/96gauge metallized pet/5.5 mils LLDPE
| Electrical Properties |
|
| EMI Shielding (MIL-B-81705-Rev-C): |
>40 db Between 1 & 10 GHz |
| Resistivity-Conductive Metal Layer (ASTM D-257): |
<2 Ohms/sq. in. avg. |
| Surface Resistivity (both surfaces) (ASTM I-257 @ 12% RH): |
<1012 Ohms. sq. in. |
| Static Decay (FTMS 101C, Method 4046.1 5000 to 0 Volts): |
<0.05 Seconds |
| Capacitive Probe Test (High Voltage Discharge) - (EIA-std 541/Appendix E-1 KV): |
<8 Volts |
| Charge Generation-nominal (Modified incline plane Avg. nC/sq.in.): |
|
| *PTFE Fluoropolymer: |
-0.09 |
| Quartz: |
+0.10 |
| Physical Properties |
|
| Total Thickness: |
7.0 mils |
| Light Transmission (ASTM D-1003-77) |
<.01% |
| Tensile Strength (ASTM D882-83 Method A) |
735 lbs. |
| Tear Strength: (D1004-66 - Notched) |
MD: 5.8 lbs.
TD: 7.5 lbs. |
| Burst Strength (FTMS 101-C Method 2007 1a) |
>130 psi |
| Puncture Strength (FTMS 101-C Method A) |
>38 lbs. |
| Elongation (ASTM D822-83 Method A) |
MD: 40%
TD: 74% |
| Heat Seal Strength (ASTM D-1876-72 - iS2 Intelligent Sealing Systems) |
>11 lbs./in width |
| MVTR (ASTM F-1249 @ 100°F 100sq. in./24 hrs) |
<.0006 gms |
| OTR (@ 100% Oxygen 100 sq. in./24 hrs) ASTM D-3985 77°F @ 90% RH |
<0.0005 cc |
| Contact Corrositivity: Low Carbon Steel, Aluminum, Copper, Ag plated copper foil, Sn-Pb coated copper foil - No Evidence of Corrosion or Etching of Metal |
|
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.
