PAKVF4CNW

PAKVF4CNW is an ideal material for vacuum packaging products where protection against both moisture and oxygen are necessary. The nylon layer and the FDA approved metallocene poly inner layer provides better puncture resistance than a standard PE/LLDPE sealant layer. The sealant layer is FDA compliant.

 

PHYSICAL PROPERTIES: 48 Ga PET/ADH/0.00035" FOIL/foil/60 gauge BON/metallocene polyethylene

 

Total Thickness (mils)	5.0 mil
Foil layer	0.00035"
WATERVAPOR TRANSMISSION RATE (ASTM F-1249)	0.0006 gms/100 sq.In./24 hrs.
O2 TRANSMISSION RATE (ASTM D3985)	0.0006/cc/100 sq.In./24 hrs.
TENSILE STRENGTH (ASTM D 882)Lbs at break	MD 17 lb. XMD 14.0
TEAR (ASTM-689)	MD 800 gms XMD 1300 gms
SEAL STRENGTH (ASTM-D-882) 375F;26psi; 1 sec	12 lb./in
PUNCTURE STRENGTH (TMS 101-C, Method A)	>25 LBS

IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.