
PAKVF4K
IMPAK’s Foil Kraft lamination is a barrier material used where very low oxygen and moisture levels are required. It has a brown kraft paper layer on its exterior and its foil layer can be seen through the interior sealant layer. Unprinted film can be used for applications such as stand up bags for protein powders, coffee beans and other food products.
PHYSICAL PROPERTIES
Total Thickness (mils) | 5.0 mil |
WATERVAPOR TRANSMISSION RATE (ASTM F-1249) | 0.0005 gr./100in² 24 hr. |
O2 TRANSMISSION RATE (ASTM D-3985) |
0.01/cc/100in²/24 hrs. |
TENSILE STRENGTH (TAPPI T-494) | 29 psi MD 20 psi XMD |
BREAKING STRENGTH (TAPPI T494) | 35gm. |
RECOMMENDED HEAT SEAL CONDITIONS | 400 °F/40 PSI/1 sec. |
Foil Thickness | .00035 MINIMUM |
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.