This lamination of film, aluminum foil and polyethylene has a wide range of uses where vacuum processing or a highly puncture resistant barrier film is needed. It is ideal for packaging of items susceptible to corrosion, and in food packaging, where very low oxygen levels are required. The outer layer of nylon provides a superior oxygen barrier and makes this material ideal for vacuum packaging.
PHYSICAL PROPERTIES (NYLON/POLYETHYLENE/.00035 ALUMINUM FOIL/ADH/LLDPE)
|TOTAL THICKNESS||4.3 mils|
|WATERVAPOR TRANSMISSION RATE (FED 101)||<0.0003 gr./100 in2/ 24 hrs.|
|O2 TRANSMISSION RATE (MOCON)
(measured to .005 - we certify 0.01)
|0.001/cc/in2 /24 hrs.|
|TENSILE STRENGTH (ASTM D882-83, A)||24 lb./in. MD 32
|BREAKING STRENGTH (GRAB-FED 191)||66 lb. MD 81
|BURSTING STRENGTH (FTMS 191-C, 5122)||71 lb./in2|
|PUNCTURE STRENGTH (FTMS 101-C, 2065.1)||>22 psi.|
|RECOMMENDED HEAT SEAL CONDITIONS||425oF/40 PSI/1 sec.|
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.