IMPAK's all-electric industrial vacuum sealers are outstanding units for medical and clean room use. Unlike air driven pneumatic sealing machines, The electric sealers have no need for an air compressor source. Since the sealers do not require an air compressor unit, these motor driven vacuum sealers will work more quietly than other pneumatic driven vacuum sealers on the market. This sealer gives a strong 5mm - almost .25 inch - seal from a frame that is built for either 17.7" or 13.8" wide pouches.
SPECIFICATIONS:
Seal Length: 14 inch (13.8" ID, 350 mm)
Seal Width: 0.2 inch (5 mm)
Heating: Single heating element
Pump: Electric
Electric: 110V/60Hz
Airflow rate: 0.88 CFM (25 Liter/minute)
Net weight: 57 lb, Shipping weight: 73 lb.
FEATURES:
Nozzle type vacuum sealer removes air directly from pouch
Excellent for medical, light commercial and clean room applications
No need for an external compressor
Compact size to fit small spaces
Stainless steel body and polished finish
Uses quality parts for a long life with minimal maintenance requirements
Need an upgrade on your Amerivacs machine? Here are our customer's testimonials
“Compared to the Amerivac units I have had over the years it feels like I never change the elements and in fact I am not even sure where the spare parts kit that I purchased with this fantastic little machine is located.”
“Better quality, stainless steel, and built & shipped to me within 4 days of ordering”
“If I was running IMPAK those machines would be priced higher than their competitor- San Jose, CA Operations Manager”
One of IMPAK's clients was using electric vacuum sealer for their medical application.
Clean Room Ready
Machine taken into Class 100 clean room where all surfaces are wiped down with an 80/20 mix of sterile water/isopropyl alcohol then double bagged and sealed in virgin poly bags.
Nitrogen Generator Kit
The nitrogen generator produces nitrogen gas (N2) from a standard compressed air line. This model is designed to generate nitrogen at purities between 95% and 99.5%.
The nitrogen generator can be used as a replacement for heavy and bulky nitrogen gas tanks. Its slick and compact design allows users to integrate it with their current gas flush enabled vacuum sealers without having to worry about it taking up too much space. Also, users will not have to worry about depleting their nitrogen gas source, as our generator produces nitrogen from clean compressed air.
NOTE: The Nitrogen Generator Kit requires a compressed air source to be used.
Sterile Air
With the Sterile Air Kit added to the Nitrogen Generator, gas flush impurities are virtually eliminated. Two pre-filters with PM indicators which remove contaminants and water from the compressed air line before they reach the nitrogen generator. After leaving the generator the air is pushed through a Post filter which results in a sterile nitrogen flow of 99.9999+% efficiency at 0.01 micron. This is essential for food and sensitive applications where purity is critic
Spare Parts Kit includes:
(2) fuses: 15A, 2A
(2) heating elements
(2) teflon covers
(1) Screw driver
(1) Wrench
(2) Hex Keys
Buy Here
