15" Industrial Impulse Heat Sealer (PRE-ORDER) - MP-15

Each pneumatically powered bag sealer unit has sufficient jaw clearance to introduce your package from back to front or side-to-side. Standard controls include a glycerin filled gauge, pressure regulator, separate heat and cool timers and a tap to start foot pedal. This ensures that each bag seal will be airtight and water tight. All IMPAK bag sealers are powder coated and therefore clean room compatible.  

PRE-ORDER ITEM: Due to the limitation of ecommerce programming, it shows as “in stock” item. This is a Pre-Order sealer machine that needs to be built. Contact us for expedited orders and current lead times

This unit requires a separate compressed air source capable of providing 80 PSI of clean, dry air.

Features include:

• Analog timers for heat and cool
• Pneumatically actuated sealing jaw
• 15" x 0.25" nichrome heating element
• Jaw clearance for side to side material feed
• Airtight and watertight seals
• Foot pedal operated
• Bottom flange allows for horizontal or vertical mounting of machine
• Low pressure close
• Analog pressure regulator and display
• 120V/60Hz/10 amps
• Heavy duty steel construction
• Made in USA

DIMENSIONS (L x W x H): 18.5" x 12" x 8.5"
SHIPPING WEIGHT: 40 lbs.

One year warranty parts and labor not including consumables, and detailed operating instructions. Spare parts kit sold seperately.

Part Number: MPXSPPT15

Single Element Spare Parts Kit

Includes:

(1) 0.25" wide, 15" Long Heating Element

(1) 1/16" thick x 1/2" wide silicon strip

(2) 6 mil thick, 2" wide, 15.25" Long Teflon covers with adhesive strips

(2) 10 mil thick, 0.5" Wide, 15.25" Long Teflon Strips with Adhesive Backing

BUY

Part Number: MPXSPPT15D

Dual Element Spare Parts Kit

Includes:

(2) 0.25" wide, 15" Long Heating Element

(2) 1/16" thick x 1/2" wide silicon strip

(2) 6 mil thick, 2" wide, 15.25" Long Teflon covers with adhesive strips

(4) 10 mil thick, 0.5" Wide, 15.25" Long Teflon Strips with Adhesive Backing

BUY

Consumables

MP-15, MP-20, MP-25 Consumables

• MPH1415 - 0.25" Heating Element
• RM23010-1 - 6 mil x 2" x 1 yd. Teflon PTFE Cover with Adhesive

MP Line:

MP-20 - 20" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

MP-25 - 25" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

MPDSS Line:

MPDSS-15 - 15" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

MPDSS-20 - 20" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

MPDSS-25 - 25" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

iS² Line:

IS2-20: 20" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER

IS2-25: 25" MEDICALLY VALIDATABLE THERMAL IMPULSE SEALER