"The Recognized Technical Experts in Our Field"
We Modify Band Sealers to Fit Your Specific Need
This horizontal tabletop RapidSealer TM (Band Sealer) is designed to be used almost right out of the box, and can be set up in 5-10 minutes. This sealer has a right to left configuration and the bag is fed from the right side of the unit.
Stainless steel frame
Solid state temperature control
Stepless speed control
Emergency stop button for operator safety
Fuse protected
Seal Speed: 0-320" per minute (0-12m per minute)
Adjustable Seal Width: 0.125" - 0.625" / 3mm - 16mm
Temperature Range: 32-572º F / 0-300º C
Voltage/Hz: 110v/60Hz
Power: 500W / 4.55A
Maximum Load on Conveyor: 5.5 lbs. / 2.5 kg
Weight: 65 lbs. / 29.5 kg - Ships common carrier no pallet required
WARNING: Spare Parts & Accessories are now SOLD SEPARATELY!
In order to reduce the base price of our RapidSealers, we no longer supply accessories and spare parts with each unit. This allows our customers to select these add-ons only as needed.
The following are additional accessories which may be added-on:
(10) PTFE bands
(2) Urethane drive belts
(1) Embossing wheel and number kit containing (5) dyes each of number 0 to 9 and (3) dies each of the letters "M", "F", "D", and "E", "X", "P"
Spare Parts Kit is HIGHLY RECOMMENDED.
Purchase spare parts kit with machine at $99.40 instead of regular price at $159.95.
Spare Parts Kit for RSH1525 Sealer
77XSPPTKT1525
INCLUDED ITEMS:
° 2 urethane Drive Belts
° 10 *PTFE Flouropolymer Bands
° 1 Printed Circuit Board
Full Embossing Kit for RS1525 Series:
SPK-RSH1525
INCLUDED ITEMS:
(1) Convex Embossing Wheel
(3) each M, F, D, E, X, P
(6) each 0-8,
(5) each 9;
(3) Blank,
(6) Period
PTFE Fluoropolymer, or Polytetrafluoroethylene, known for its strength and durability, was discovered in 1938 by Roy Plunkett, a chemist at Kinetic Chemicals. This substance has been widely used in the manufacture of bullet proof vests, munitions, wire and equipment coating at NASA, non-stick cookery, and many other applications.
Teflon® is the registered trademark of the E. I. DuPont Corporation for its PTFE Fluoropolymer product line. The use of this term is restricted solely to companies selling E. I. DuPont Corporation's products. IMPAK Corporation makes no claim and cannot guarantee this material is made with E. I. DuPont Corporation products.
Consumables:
